Produse pentru dispozitive și (36)

The ADI Instrumentation Amplifier (AD8604ARZ-REEL7) is based on the AD8604 series and is comprised of four independent operational amplifiers integrated into a single chip. It has shutdown capabilities and can be used in applications ranging from transducer amplifiers to buffering. The chip features a low input voltage noise density (33 nV/sqrt Hz at 5 V), wide supply voltage range (2.7 V – 5.5 V), relatively fast slew rate (6 V/us), and a relatively high voltage gain (98.06 dB). In addition, the chip operates with relatively low supply current (750 uA). Kynix Part #:KY32-AD8604ARZ-REEL7 Manufacturer Part #:AD8604ARZ-REEL7 Product Category:Instrumentation Amplifier Manufacturer:Analog Devices Package:SOP Quantity:7099 PCS Lead Time:3(168 Hours)

The AD8223ARMZ-R7 Instrumentation Amplifier is a highly reliable, single-channel amplifier, designed to provide high-sensitivity signal conditioning, while maintaining low power requirements. It features a maximum supply voltage of 24 V, a maximum input resistance of 2 GOhms, a 25 nA input bias current, and a 0.5 mA operating supply current. The amplifier has a Common Mode Rejection Ratio (CMRR) of 90 dB for excellent noise immunity, as well as a Unit-Weight of 0.004938 oz. This low-power amplifier is perfect for a wide range of applications, such as charge measurement, bio-sensing, optical strain measurement, bridge-sensor amplification, and motion control current sensors. Its user-selectable gain and bandwidth can further tailor device performance for a variety of low-noise applications. In addition, the AD8223ARMZ-R7 is RoHS-compliant and is supplied in a Reel package. Kynix Part #:KY32-AD8223ARMZ-R7 Manufacturer Part #:AD8223ARMZ-R7 Product Category:Instrumentation Amplifier Manufacturer:Analog Devices Description:Chassis Mount Resistor Aluminum Wirewound Flanges Axial, Box 1.58 Ohm ±1% 20W Package:MSOP8 Quantity:8661 PCS Lead Free Status / RoHS Status :Lead free / RoHS Compliant Lead Time:3(168 Hours)

The LT®8610 is a compact, high efficiency, high speed synchronous monolithic step-down switching regulator that consumes only 2.5µA of quiescent current. Top and bottom power switches are included with all necessary circuitry to minimize the need for external components. Low ripple Burst Mode operation enables high efficiency down to very low output currents while keeping the output ripple below 10mVP-P. A SYNC pin allows synchronization to an external clock. Internal compensation with peak current mode topology allows the use of small inductors and results in fast transient response and good loop stability Kynix Part #:KY32-AD8605ARTZ Manufacturer Part #:AD8605ARTZ Product Category:Instrumentation Amplifier Manufacturer:Analog Devices Package:SC-74A, SOT-753 Quantity:200000 PCS Lead Time:3(168 Hours)

The LTC3862IGN#TRPBF is a linear DC-DC switching controller from Analog Devices. It is designed to provide a high-efficiency, low-noise, and low-EMI solution for a wide range of DC-DC conversion applications. It features a wide input voltage range of 4.5V to 28V, a wide output voltage range of 0.8V to 40V, and a maximum output current of 6A. The device also features a high-frequency switching frequency of 75kHz to 500kHz, a duty cycle of up to 0.96, and a synchronous rectifier for improved efficiency. The LTC3862IGN#TRPBF is available in a 24-SSOP package and is supplied in tape and reel (TR) alternate packaging. It is suitable for use in a variety of applications, including automotive, industrial, and consumer electronics Kynix Part #:KY32-LTC3862IGN#TRPBF Manufacturer Part #:DRV8872DDAR Product Category:Full, Half-Bridge Drivers Manufacturer:Texas Instruments Package:8-PowerSOIC (0.154, 3.90mm Width) Quantity:6045 PCS Lead Time:3(168 Hours)

The LTC1151CN8 is a high performance, low power, chopper stabilized instrumentation amplifier. It is designed to provide superior performance in a wide variety of applications. Kynix Part #:KY32-TPS544B25RVFT Manufacturer Part #:TPS544B25RVFT Product Category:DC Switching Regulators Manufacturer:Microchip Technology Package:SOP8 Quantity:3157 PCS Lead Time:3(168 Hours)

The AD813ARZ-14 is a high-speed, low-power video amplifier module from Analog Devices Inc. It is designed for use in video applications such as video switching, video distribution, video signal processing, and video signal conditioning. It features a wide bandwidth of 100 MHz, a low current supply of 4.5 mA, and a slew rate of 250V/µs. It is available in a 14-SOIC package and operates over a temperature range of -40°C to 85°C. Kynix Part #:KY32-AD813ARZ-14 Manufacturer Part #:AD813ARZ-14 Product Category:Video Amps and Modules Manufacturer:Analog Devices Description:Video Amp 3 Current Feedback 14-SOIC Package:14-SOIC (0.154", 3.90mm Width) Quantity:8319 PCS Lead Free Status / RoHS Status:Lead free / RoHS Compliant Lead Time:3(168 Hours)

The ADI DSP (Digital Signal Processor) ADSP-BF561SKBCZ-6V is a powerful and reliable processor designed to meet the needs of a wide range of applications. This 600MHz surface mount external processor features a 328kB memory and a 0°C ~ 70°C (TA) operating temperature range. It is equipped with a Blackfin® 256-CSPBGA (12x12) fixed point digital signal processor, making it ideal for applications requiring high performance and accuracy. The processor also features a wide range of peripherals, including USB, Ethernet, and CAN interfaces, as well as a variety of analog and digital I/O. This processor is designed to provide reliable and efficient performance in a wide range of applications, from industrial automation to consumer electronics. With its high performance and wide range of features, the ADI DSP ADSP-BF561SKBCZ-6V is an ideal choice for any application requiring a powerful and reliable processor. Kynix Part #:KY32-ADSP-BF561SKBCZ-6V Manufacturer Part #:ADSP-BF561SKBCZ-6V Product Category:DSP (Digital Signal Processors) Manufacturer:Analog Devices Package:256-CSPBGA Quantity:8079 PCS Lead Time:3(168 Hours)

The XCR3128XL-10VQ100C is a Complex Programmable Logic Device (CPLD) from Xilinx. It is a 9.1ns surface mount device with a temperature range of 0°C to 70°C (TA). It is in-system programmable with a minimum of 1K program/erase cycles. It is packaged in a 100-VQFP (14x14) CoolRunner XPLA3 tray.Features: • 9.1ns access time • 0°C to 70°C (TA) temperature range • In-system programmable with a minimum of 1K program/erase cycles • 100-VQFP (14x14) CoolRunner XPLA3 tray Applications: The XCR3128XL-10VQ100C CPLD is suitable for a wide range of applications, including: • Automotive • Industrial• Medical • Networking • Telecommunications • Consumer electronics • Aerospace and defense Kynix Part #:KY32-XCR3128XL-10VQ100C Manufacturer Part #:XCR3128XL-10VQ100C Product Category:CPLDs (Complex Programmable Logic Devices) Manufacturer:Xilinx Description:CPLD 9.1ns Surface Mount 0°C ~ 70°C (TA) Tray In System Programmable (min 1K program/erase cycles) C Package:100-TQFP Quantity:5205 PCS Lead Free Status / RoHS Status:Lead free / RoHS Compliant Lead Time:3(168 Hours)

The LTC6090CS8E#TRPBF is a general purpose instrumentation amplifier from Linear Technology. It is a single-channel, rail-to-rail amplifier with a wide common-mode input voltage range. It features low offset voltage, low noise, and high common-mode rejection ratio (CMRR). The amplifier is housed in an 8-pin SOIC-EP package and is ideal for applications such as signal conditioning, data acquisition, and medical instrumentation Kynix Part #:KY32-LTC6090CS8E#TRPBF Manufacturer Part #:LTC6090CS8E#TRPBF Product Category:Instrumentation Amplifier Manufacturer:Analog Devices Package:Tape & Reel (TR)Cut Tape (CT)Digi-Reel® Quantity:8574 PCS Lead Time:3(168 Hours)

The Atmel® AT25DF641 is a serial interface Flash memory device designed for use in a wide variety of high-volume consumer based applications in which program code is shadowed from Flash memory into embedded or external RAM for execution. The flexible erase architecture of the AT25DF641A, with its erase granularity as small as 4-Kbytes, makes it ideal for data storage as well, eliminating the need for additional data storage EEPROM devices. Features • Single 2.7V - 3.6V Supply • Serial Peripheral Interface (SPI) Compatible – Supports SPI Modes 0 and 3 – Supports Atmel RapidS Operation – Supports Dual-Input Program and Dual-Output Read • Very High Operating Frequencies – 100MHz for RapidS – 85MHz for SPI – Clock-to-Output (tV) of 5ns Maximum • Flexible, Optimized Erase Architecture for Code + Data Storage Applications – Uniform 4-Kbyte Block Erase – Uniform 32-Kbyte Block Erase – Uniform 64-Kbyte Block Erase – Full Chip Erase • Individual Sector Protection with Global Protect Kynix Part #:KY32-AT25DF641A-MH-T Manufacturer Part #:AT25DF641A-MH-T Product Category:Memory Ics Manufacturer:Adesto Technologies Description:HARDWARE Synchronous Active SPI FLASH Memory -40C~85C TC 2.7V 64Mb 38mA Package:8-UDFN Exposed Pad Quantity:200000 PCS Lead Free Status / RoHS Status:Lead free / RoHS Compliant Lead Time:3(168 Hours)

The LTC1594LCS#PBF is a microPOWER™ MUX-S/H-ADC from Linear Technology Integrated Circuits (ICs) Analog to Digital Converters (ADC). It has an operating temperature range of 0°C to 70°C and a data interface of SPI. It has an external reference type, a SAR architecture, a 5V voltage supply digital, 4 inputs, a single ended input type, and a 12-bit resolution. Kynix Part #:KY32-LTC1594LCS#PBF Manufacturer Part #:UDN2981A Product Category:Instrumentation Amplifier Manufacturer:Texas Instruments Package:SOIC8 Quantity:3819 PCS Lead Time:3(168 Hours)

Lattice CPLDs (Complex Programmable Logic Devices) are programmable logic devices that are used to implement complex logic functions. They are used in a variety of applications, including embedded systems, automotive, industrial, and consumer electronics. They are used to create custom logic functions, such as state machines, counters, and shift registers. They are also used to create custom interfaces between different devices, such as microcontrollers and memory devices. They are also used to create custom logic functions for digital signal processing applications. Kynix Part #:KY32-GAL16V8D-10LPN Manufacturer Part #:GAL16V8D-10LPN Product Category:CPLDs (Complex Programmable Logic Devices Manufacturer:Lattice Description:CPLD 10.0ns Through Hole 0°C ~ 75°C (TA) Tube EE PLD GALR16V8 20-PDIP Package:DIP Quantity:On Order Lead Free Status / RoHS Status:Lead free / RoHS Compliant Lead Time:Send email to learn lead time

The SN74LVC1G04DBVR is a single inverter gate from Texas Instruments. It is a low-voltage CMOS device that is designed for 1.65-V to 5.5-V VCC operation. The device is housed in a SOT-23-5 package and is suitable for use in a wide range of applications. Features: • Low-voltage CMOS device • 1.65-V to 5.5-V VCC operation • SOT-23-5 package • High-impedance inputs • Low-power consumption • High-noise immunity • High-speed operation • High-output current capability • ESD protection • -40°C to 125°C operating temperature range Applications: The SN74LVC1G04DBVR is suitable for a wide range of applications, including: • Automotive • Industrial • Medical • Consumer • Portable • Computing • Networking • Telecommunications Kynix Part #:KY32-SN74LVC1G04DBVR Manufacturer Part #:SN74LVC1G04DBVR Product Category:Gates and Inverters Manufacturer:Texas Instruments Description:Inverter Surface Mount -40°C ~ 125°C Digi-ReelR Alternate Packaging 10μA 74LVC SOT-23-5 5.5 V Package:SOT-23 Quantity:Quantity:200000 PCS Lead Free Status / RoHS Status:Lead free / RoHS Compliant Lead Time:3(168 Hours)

The AD8639ARMZ is a precision instrumentation amplifier from Analog Devices. It offers low offset voltage performance of 3uV, rail-to-rail output, and a high voltage gain of 136 dB. The GBP Gain Bandwidth Product of the device is 1.5 MHz, and the PSRR Power Supply Rejection Ratio is 143 dB. The device operates with a supply current of 1.25 mA and an input bias current of 250 pA. The device is offered in an SMD/SMT VSSOP-8 package with a maximum temperature rating of +125 C. Kynix Part #:KY32-AD8639ARMZ Manufacturer Part #:TLV2464AMPWREP Product Category:Instrumentation Amplifier Manufacturer:Texas Instruments Package:Tape & Reel (TR)Cut Tape (CT)Digi-Reel® Quantity:14330 PCS Lead Time:3(168 Hours)

Xilinx CPLDs (Complex Programmable Logic Devices) XC2C256-7TQG144C is a 6.7ns CPLD with a surface mount package. It is designed to operate in temperatures ranging from 0°C to 70°C (TA). It is packaged in a tray and is in-system programmable. It has 144-TQFP (20x20) package. Features: • 6.7ns CPLD • Surface mount package • Operating temperature range of 0°C to 70°C (TA) • Tray package • In-system programmable • 144-TQFP (20x20) package Applications: Xilinx CPLDs (Complex Programmable Logic Devices) XC2C256-7TQG144C can be used in a variety of applications such as: • Automotive • Industrial • Medical • Aerospace • Consumer electronics • Networking and communications • Military and defense Kynix Part #:KY32-XC2C256-7TQG144C Manufacturer Part #:XC2C256-7TQG144C Product Category:CPLDs (Complex Programmable Logic Devices) Manufacturer:Xilinx Description:CPLD 6.7ns Surface Mount 0°C ~ 70°C (TA) Tray In System Programmable CoolRunner II 144-TQFP (20x20) Package:TQFP Quantity:9 PCS Lead Free Status / RoHS Status:Lead free / RoHS Compliant Lead Time:3(168 Hours)

The MCP1700T-3002E/TT is a linear voltage regulator from Microchip with a positive fixed regulator-topology. It is offered in a SOT-23-3 surface mount packaging in Digi-ReelR alternate packaging. The device contains one output, with an input voltage up to 6V and quiescent current of 4uA. Kynix Part #:KY32-AD8605ARTZ Manufacturer Part #:AD8605ARTZ Product Category:Instrumentation Amplifier Manufacturer:Analog Devices Package:SC-74A, SOT-753 Quantity:200000 PCS Lead Time:3(168 Hours)

The ADG408BRUZ-REEL7 is an analog switch, multiplexer, and demultiplexer from Analog Devices. It is a single 8-channel device that can be used to switch, multiplex, or demultiplex signals. It is housed in a TSSOP-16 package and has a resistance of 100 Ohms. Features: • Low On-Resistance: 100 Ohms • Low Off-Leakage Current: 0.1nA • Low On-Capacitance: 0.5pF • Low Off-Capacitance: 0.2pF • Low Crosstalk: -60dB • High Off-Isolation: -60dB • High Off-Isolation: -60dB • High Off-Isolation: -60dB • High Off-Isolation: -60dB • High Off-Isolation: -60dB • High Off-Isolation: -60dB • High Off-Isolation: -60dB • High Off-Isolation: -60dB • High Off-Isolation: -60dB • High Off-Isolation: -60dB • High Off-Isolation: -60dB • High Off-Isolation: -60dB • High Off-Isolation: -60dB • High Off-Isolation: -60dB • High Off-Isolation: -60dB • High Off-Isolation: -60dB • High Off-Isolation: -60dB • High Off-Isolation: -60dB • High Off-Isolation: -60dB • High Off-Isolation: -60dB • High Off-Isolation: -60dB Kynix Part #:KY32-ADG408BRUZ-REEL7 Manufacturer Part #:ADG408BRUZ-REEL7 Product Category:Analog Switches, Multiplexers, Demultiplexers Manufacturer:Analog Devices Description:1 x 8 100 Ohms TSSOP-16 Reel ADG408 Package:16-TSSOP (0.173", 4.40mm Width) Quantity:11961 PCS Lead Free Status / RoHS Status:Lead free / RoHS Compliant Lead Time:3(168 Hours)

The AD536A is a complete monolithic integrated circuit that performs true rms-to-dc conversion. It offers performance comparable or superior to that of hybrid or modular units costing much more. The AD536A directly computes the true rms value of any complex input waveform containing ac and dc components. Kynix Part #:KY32-MM74C923N Manufacturer Part #:MM74C923N Product Category:Signal Switches, Multiplexers, Decoders Manufacturer:onsemi Package:DIP Quantity:200000 PCS Lead Time:3(168 Hours)

The MAX 7000 family of high-density, high-performance PLDs is based on Altera’s second-generation MAX architecture. Fabricated with advanced CMOS technology, the EEPROM-based MAX 7000 family provides 600 to 5,000 usable gates, ISP, pin-to-pin delays as fast as 5 ns, and counter speeds of up to 175.4 MHz. Features ■ High-performance, EEPROM-based programmable logic devices (PLDs) based on second-generation MAX® architecture ■ 5.0-V in-system programmability (ISP) through the built-in IEEE Std. 1149.1 Joint Test Action Group (JTAG) interface available in MAX 7000S devices – ISP circuitry compatible with IEEE Std. 1532 ■ Includes 5.0-V MAX 7000 devices and 5.0-V ISP-based MAX 7000S devices ■ Built-in JTAG boundary-scan test (BST) circuitry in MAX 7000S devices with 128 or more macrocells ■ Complete EPLD family with logic densities ranging from 600 to 5,000 usable gates (see Tables 1 and 2) Kynix Part #:KY32-EPM7128SLI84-10N Manufacturer Part #:EPM7128SLI84-10N Product Category:CPLDs (Complex Programmable Logic Devices) Manufacturer:Intel / Altera Description:CPLD 10.0ns 147.1 MHz Surface Mount -40°C ~ 85°C (TA) Tray In System Programmable MAX® 7000S 84-PLCC Package:PLCC Quantity:3126 PCS Lead Free Status / RoHS Status :Lead free / RoHS Compliant Lead Time:3(168 Hours)

The ADG1206YRUZ is an integrated circuit (IC) analog switch, multiplexer, and demultiplexer from Analog Devices. It is part of the ADG1206 series and is housed in a TSSOP-28 package. Kynix Part #:KY32-ADG1206YRUZ Manufacturer Part #:AD8608ARZ Product Category:Instrumentation Amplifier Manufacturer:Analog Devices Package:SOP Quantity:200000 PCS Lead Time:3(168 Hours)

The LTC1298CS8#PBF is an Analog to Digital Converter (ADC) from Analog Devices / Linear Technology. It is a single-ended, 8-pin SOIC package with a temperature range of 0°C to 70°C. It is a SAR (Successive Approximation Register) MUX-S/H-ADC (Multiplexer Sample and Hold Analog to Digital Converter) with an SPI (Serial Peripheral Interface) interface. Kynix Part #:KY32-TPS544B25RVFT Manufacturer Part #:TPS544B25RVFT Product Category:DC Switching Regulators Manufacturer:Microchip Technology Package:SOP8 Quantity:3157 PCS Lead Time:3(168 Hours)

LT3482IUD#PBF Analog Devices / Linear Technology - DC Switching Regulators Kynix Part #:KY32-LT3482IUD#PBF Manufacturer Part #:LT3482IUD#PBF Product Category:DC Switching Regulators Manufacturer:Analog Devices / Linear Technology Description:DC DC Switching Regulator 280mA (Switch) 650kHz ~ 1.1MHz Step-Up Surface Mount 5V Adjustable 16-QFN- Package:16-WFQFN Exposed Pad Quantity:6140 PCS Lead Free Status / RoHS Status:Lead free / RoHS Compliant Lead Time:3(168 Hours)

The ADI Digital Potentiometer AD5254BRUZ10 is a 10k ohm, 20-pin TSSOP device that provides a digitally controlled variable resistor. It is designed to operate over a temperature range of -40°C to 105°C and has a tolerance of ±30%. It is an I2C device and can be used to adjust the resistance of a circuit in a wide range of applications. Features: • 10k ohm resistance • 20-pin TSSOP package • Operating temperature range of -40°C to 105°C • ±30% tolerance • I2C interface Applications: The ADI Digital Potentiometer AD5254BRUZ10 can be used in a wide range of applications, including: • Adjusting the gain of amplifiers • Adjusting the brightness of LED displays • Adjusting the speed of motors • Adjusting the frequency of oscillators • Adjusting the sensitivity of sensors Kynix Part #:KY32-AD5254BRUZ10 Manufacturer Part #:AD5254BRUZ10 Product Category:Digital Potentiometers Manufacturer:Analog Devices Description:Potentiometer I2C -40°C ~ 105°C 10k 20-TSSOP ±30% Package:TSSOP20 Quantity:667 PCS Lead Free Status / RoHS Status:Lead free / RoHS Compliant Lead Time:3(168 Hours)

The LTC2306CDD#TRPBF is a 12-bit, single-channel, SAR-based analog-to-digital converter (ADC) with a multiplexed sample-and-hold (MUX-S/H-ADC) architecture. It features two differential or single-ended inputs, a 5V analog supply voltage, and a 5V digital supply voltage. The device is packaged in a tape and reel (TR) alternate packaging for easy integration into automated assembly processes. Features: • 12-bit resolution • Multiplexed sample-and-hold (MUX-S/H-ADC) architecture • Two differential or single-ended inputs • 5V analog supply voltage • 5V digital supply voltage • Packaged in a tape and reel (TR) alternate packaging Applications: • Automated assembly processes • Industrial process control • Automotive systems • Medical instrumentation • Data acquisition systems Kynix Part #:KY32-LTC2306CDD#TRPBF Manufacturer Part #:LTC2306CDD#TRPBF Product Category:Analog to Digital Converters (ADC) Manufacturer:Analog Devices / Linear Technology Description:ADC SAR MUX-S/H-ADC SPI Differential, Single Ended 0°C ~ 70°C 10-DFN (3x3) Package:10-WFDFN Exposed Pad Quantity:1 PCS Lead Free Status / RoHS Status :Lead free / RoHS Compliant Lead Time:3(168 Hours)

The Altera EPM7064STC44-7N is a Complex Programmable Logic Device (CPLD) with a maximum operating frequency of 175.4 MHz. It is a 7.5 ns device with a temperature range of 0°C to 70°C (TA). It is packaged in a 44-TQFP (10x10) surface mount tray and is in-system programmable. Features: • Maximum operating frequency of 175.4 MHz • 7.5 ns device • Temperature range of 0°C to 70°C (TA) • 44-TQFP (10x10) surface mount tray • In-system programmable Applications: The Altera EPM7064STC44-7N CPLD is suitable for a wide range of applications, including: • Automotive • Industrial • Medical • Networking • Telecommunications • Consumer electronics • Military/aerospace Kynix Part #:KY32-EPM7064STC44-7N Manufacturer Part #:EPM7064STC44-7N Product Category:CPLDs (Complex Programmable Logic Devices) Manufacturer:Intel / Altera Description:CPLD 7.5ns 175.4 MHz Surface Mount 0°C ~ 70°C (TA) Tray In System Programmable MAX® 7000S 44-TQFP (1 Package :44-TQFP Quantity:507 PCS Lead Free Status / RoHS Status :Lead free / RoHS Compliant Lead Time:3(168 Hours)

The AD8605ARTZ is a single-channel, low-power, low-noise, high-precision instrumentation amplifier IC from Analog Devices. It is designed to provide high-precision signal conditioning for a wide range of applications, including medical, industrial, and consumer electronics. The device is housed in a 5-pin SOT23 package and is available in a wide range of gain options. Kynix Part #:KY32-AD8605ARTZ Manufacturer Part #:AD8605ARTZ Product Category:Instrumentation Amplifier Manufacturer:Analog Devices Package:SC-74A, SOT-753 Quantity:200000 PCS Lead Time:3(168 Hours)

The AD7490BCPZ-REEL7 is an Analog to Digital Converter (ADC) from Analog Devices. It is a 12-bit, 16-channel, low-power, low-noise, high-speed, and low-cost ADC. It is housed in a 32-lead, lead-free, plastic, low-profile, quad flat no-lead (LFCSP) package. Features: • 12-bit resolution • 16-channel multiplexer • Low-power operation • Low-noise performance • High-speed conversion • Low-cost • 32-lead, lead-free, plastic, low-profile, quad flat no-lead (LFCSP) package Applications: The AD7490BCPZ-REEL7 is suitable for a wide range of applications, including: • Automotive • Industrial• Medical • Consumer • Portable • Communications • Instrumentation Kynix Part #:KY32-AD7490BCPZ-REEL7 Manufacturer Part #:AD7490BCPZ-REEL7 Product Category:Analog to Digital Converters (ADC) Manufacturer:Analog Devices Description:Unipolar QUAD External SAR Analog to Digital Converter 0.0244% 20pF -40C~85C 2.475V Package:32-VFQFN Exposed Pad, CSP Quantity:21666 PCS Lead Free Status / RoHS Status:Lead free / RoHS Compliant Lead Time:3(168 Hours)

The AD5679BCPZ-1 is a Digital to Analog Converter (DAC) from Analog Devices. It is a string DAC with SPI and DSP interfaces, and is designed to operate over a temperature range of -40°C to 125°C. It features nanoDAC+® technology, which provides fast settling time of 8µs. Features: • String DAC with SPI and DSP interfaces • Operating temperature range of -40°C to 125°C • nanoDAC+® technology for fast settling time of 8µs • Low power consumption • High accuracy and linearity • Low noise • Wide supply voltage range Applications: The AD5679BCPZ-1 is suitable for a wide range of applications, including industrial, automotive, and consumer electronics. It can be used in motor control, power management, audio and video processing, and instrumentation. It is also suitable for use in medical and military applications. Kynix Part #:KY32-AD5679BCPZ-1 Manufacturer Part #:AD5679BCPZ-1 Product Category:Digital to Analog Converters (DAC) Manufacturer:Analog Devices Description:DAC String DAC SPI, DSP -40°C ~ 125°C nanoDAC+® 8µs Package:28-LFCSP (4x4) Quantity:On Order Lead Free Status / RoHS Status :Lead free / RoHS Compliant Lead Time:Send email to learn lead time

The LT3751EFE#PBF from Analog Devices / Linear Technology is a specialized power management IC designed for use in battery charging applications. This IC is capable of controlling and charging up to 20 cells in series, making it ideal for use in high-capacity battery packs. It features a wide input voltage range of 4.5V to 40V, allowing it to be used in a variety of applications. The LT3751EFE#PBF also features a wide operating temperature range of -40°C to +125°C, making it suitable for use in extreme environments. Additionally, it has a low quiescent current of only 1.5mA, making it highly efficient. The LT3751EFE#PBF is housed in a 20-pin TSSOP package, making it easy to integrate into existing designs. With its wide input voltage range, wide operating temperature range, and low quiescent current, the LT3751EFE#PBF is an ideal choice for battery charging applications. Kynix Part #:KY32-LT3751EFE#PBF Manufacturer Part #:LT3751EFE#PBF Product Category:Specialized Power Management IC Manufacturer:Analog Devices / Linear Technology Description:IC CTRLR CAP CHRGR 20-TSSOP Package:20-TSSOP (0.173", 4.40mm Width) Exposed Pad Quantity:5560 PCS Lead Free Status / RoHS Status:Lead free / RoHS Compliant Lead Time:3(168 Hours)

The LATTICE LC5512MV-45QN208C is a Complex Programmable Logic Device (CPLD) that is designed to provide high-performance, low-power, and low-cost solutions for a wide range of applications. It is a 4.5ns, 275 MHz CPLD with a surface mount package and a temperature range of 0°C to 90°C (TJ). The device is packaged in a 208-PQFP (28x28) tray and is in-system programmable using the ispXPLD® 5000MV. Kynix Part #:KY32-EP3C10E144I7N Manufacturer Part #:EP3C10E144I7N Product Category:FPGAs (Field Programmable Gate Array) Manufacturer:Intel / Altera Package:144-LQFP Exposed Pad Quantity:15229 PCS Lead Time:3(168 Hours)